Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Door Lock Cylinder: Service and Repair
REMOVAL PROCEDURE
1. Remove the door seal trim. Refer to "Door Seal Trim".
2. Disconnect the outside door handle and the lock rods.
3. Remove the retaining clip and the lock cylinder.
INSTALLATION PROCEDURE
1. Install the lock cylinder with the retaining clip.
2. Connect the outside door handle and the lock rods.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
3. Install the door seal trim. Refer to "Door Seal Trim".
