Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Pressure Regulating Solenoid: Service and Repair
PRESSURE CONTROL SOLENOID
Removal Procedure
1. Remove the transaxle side cover.
2. Disconnect the electrical connection from the pressure control solenoid (PCS) (312).
Notice: Use a small screwdriver to remove the retainer clips. Be careful not to score the valve body when removing the retainer clips.
3. Remove the solenoid retainer clip (304) from the valve body.
4. Remove the pressure control solenoid (312).
Installation Procedure
1. Install the pressure control solenoid (312) into the valve body.
2. Install the retainer clip (304) into the valve body.
3. Connect the electrical connection to the pressure control solenoid (312).
4. Install the transaxle side cover.
