Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Radio/Stereo: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable
2. Remove the audio system trim plate.
3. Remove the screws and the audio system.
4. Disconnect the audio system electrical connectors.
Installation Procedure
1. Connect the audio system electrical connectors.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the audio system with the screws.
Tighten
Tighten the audio system screws to 4 Nm (35 lb.in).
3. Install the audio system trim plate.
4. Connect the negative battery cable.
