Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Speaker: Service and Repair
Front Speakers
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the front door trim panel.
3. Disconnect the electrical connector.
4. Remove the screws and the front door speaker.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the front door speaker with the screws.
Tighten
Tighten the front door speaker screws to 4 Nm (35 lb.in).
2. Connect the electrical connector.
3. Install the front door trim panel.
4. Connect the negative battery cable.
