Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Front Cross-Member: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Remove the crossmember assembly from the vehicle.
2. Remove the stabilizer clamp bolts.
3. Remove the stabilizer shaft-to-stabilizer link nuts.
4. Remove the stabilizer shaft clamps, the insulators, and the stabilizer shaft from the crossmember.
5. Remove the stabilizer link-to-control arm nut.
6. Remove the stabilizer link.
