Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
1. Install the seatback onto the seat cushion.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the front seatback bolts.
Tighten
Tighten the front seatback bolts to 45 Nm (33 lb.ft).
3. Install the seat cover to its original position.
4. Install the back panel onto the seat with the screws.
Tighten
Tighten the front seat cover screws to 12 Nm (106 lb.in).
5. Install the front bucket seat in the vehicle.
