Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Seat Back: Service and Repair
Split Rear Seatback Hinge
Removal Procedure
1. Remove the rear seatback and the rear seat cushion.
2. Remove the bolts and the seatback center hinge.
3. Remove the rear seat side bolster cushion.
4. Remove the bolts and the seatback outer hinge.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
