Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Seat Back: Service and Repair
Split Rear Seatback Lock Striker
Removal Procedure
1. Lower the rear seatbacks.
2. Remove the rear seat side bolster cushion.
3. Remove the retaining clips and the back panel trim cover.
4. Remove the bolts and the seatback lock strikers.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the seatback lock strikers with the bolts.
Tighten
Tighten the rear seatback lock striker bolts to 25 Nm (18 lb.ft).
2. Install the back panel trim cover with the retaining clips.
3. Install the rear seat side bolster cushion.
4. Raise and secure the rear seatbacks in the upright position.