Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
2. Install the caliper mounting bolts.
Tighten
Tighten the caliper mounting bolts to 27 Nm (19 ft. lbs.).
3. Install the brake hose to the caliper with the bolt and the ring seals.
Tighten
Tighten the caliper brake hose inlet bolt to 40 Nm (30 ft. lbs.).
4. Align the marks that were made when removing the front wheel, and install the wheel.
5. Lower the vehicle.
6. Fill the master cylinder reservoir to the proper level with clean brake fluid.
7. Bleed the air out of the brake system. See: Brake Bleeding