Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
1. Install the rotor on the front wheel hub and install the detent screw.
Tighten
Tighten the rotor detent screw to 4 Nm (35 inch lbs.)
2. Apply a few drops of thread-locking compound to the caliper bracket mounting bolts and install the caliper bracket.
Tighten
Tighten the caliper bracket mounting bolts to 65 Nm (48 ft. lbs.).
3. Install the brake shoes and the caliper. See: Brake Caliper