Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Brake Fluid: Description and Operation
HYDRAULIC FLUID
Brake fluid should meet the DOT-3 specification. Use DOT-4 for heavy duty applications such as trailer towing or mountain driving. Use only clear
fluid from a sealed container.
Fluid that is exposed to the air will absorb moisture. Water in the brake fluid will cause the fluid to boil and the rubber components to deteriorate.
Thoroughly clean the master cylinder reservoir cap before removing it. Do not let any dirt or foreign material fall into the fluid reservoir.
There is a fluid level switch in the master cylinder reservoir. When the fluid level is low, the BRAKE lamp in the instrument cluster will turn on.
The correct brake fluid level is marked on the left side of the master cylinder reservoir. If the fluid level is below the MIN indicator mark, check the
hydraulic brake system for leaks. Fix any leaks. Then refill the reservoir to the MAX indicator mark.
