Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
4. For vehicles with the manual transaxle, install the clutch hose connection to the master cylinder with the clip.
5. Add the brake fluid.
6. Raise and suitably support the vehicle.
7. Bleed the braking system. See: Brake Bleeding
8. Bleed the clutch master cylinder.
10. Install the low brake fluid level switch by pushing it into the side of the brake fluid reservoir opposite the engine.
11. Install the connector for the low brake fluid level switch assembly by sliding it into its mount on the top of the brake fluid reservoir.
12. Connect the brake fluid level switch to the wiring harness.