Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
6. Remove the clutch hose from the master cylinder.
7. Plug the opening to the brake lines to prevent the loss or contamination of the fluid.
8. Remove the master cylinder mounting nuts.
9. Remove the master cylinder assembly.
10. Drain the brake fluid.
Installation Procedure
1. Install the master cylinder assembly with the mounting nuts.
Tighten
Tighten the master cylinder mounting nuts to 13 Nm (115 inch lbs.).
2. Install the brake lines to the master cylinder body.
Tighten
Tighten the master cylinder brake lines to 16 Nm (12 ft. lbs.).