Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Installation Procedure
1. Insert the cable ball into the actuator cable sleeve.
2. Push the cable housing and the sleeve into the actuator until the retainers lock the cable housing in place.
3. Install the cruise control actuator mounting bolts.
Tighten
Tighten the cruise control actuator mounting bolts to 6 Nm (53 lb.in).
4. Press the cable adjuster button and adjust the cable so that the cable ball nipple is 0.5 mm (0.02 inch) from the bushing on the accelerator
assembly.
NOTE: When the adjuster button is pressed, do not allow the adjuster spring to expand to a length of more than 2 cm (3/4 inch) or the adjuster
rack will come out of the adjuster, and it will have to be reinserted. To keep the adjuster in one piece during adjustment, hold the cable when the
adjuster button is pressed.
