Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Installation Procedure
1. Insert the bait of the cable assembly into the slot in the actuator rod and then rotate the cable 90 degrees.
2. Push the guide sleeve onto the actuator rod and press the cable housing onto the actuator until it is locked in place by the retainers.
3. Clip the cable adjuster into the bracket of the pedal mount assembly.
4. Press the cable release button and slide the cable into the adjuster until the spring is fully compressed.
NOTE: When the adjuster button is pressed, do not allow the adjuster spring to expand to a length of more than 2 cm (3/4 inch) or the adjuster
rack will come out of the adjuster, and it will have to be reinserted. To keep the adjuster in one piece during adjustment, hold the cable when the
adjuster button is pressed.
