Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
62. Install a new crankshaft rear oil seal using installer J-36792 or KM-635.
63. Install the flywheel, or flexible plate for a vehicle with an automatic transaxle.
64. Install the flywheel, or the flexible plate bolts for a vehicle with an automatic transaxle.
Tighten
Tighten the flywheel bolts to 65 Nm (48 ft. lbs.). Use the angular torque gauge KM-470-B to tighten the flywheel bolts another 30 degrees plus
15 degrees. For the automatic transaxle, tighten the flexible plate bolts to 65 Nm (48 ft. lbs.).
65. Install the engine. Refer to Engine; Service and Repair.
