Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Engine Mount: Service and Repair
Engine Mount - Right Side
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Support the engine assembly using the engine support fixture J-28467-B.
3. Remove the right front wheel well splash shield.
4. Remove the air filter housing assembly bolts.
5. Remove the air filter housing assembly.
6. Remove the engine mount bracket retaining bolts.
7. Remove the engine mount bracket.
8. Remove the serpentine accessory drive belt. Refer to Steering; Power Steering Pump.