Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
9. Install the auxiliary catalytic converter lower flange bolts.
Tighten
Tighten the auxiliary catalytic converter-to-connecting pipe nuts to 40 Nm (30 ft. lbs.).
10. Install the connecting pipe mounting bracket and nuts.
Tighten
Tighten the connecting pipe mounting bracket nuts to 30 Nm (22 ft. lbs.).
11. Connect the post-converter heated oxygen sensor connector.
12. Connect the negative battery cable.
13. Refill the engine crankcase with engine oil.