Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
2. Align the timing marks on the camshaft gears, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
3. Install the timing belt.
4. Turn the hex-key tab in a counterclockwise direction to tension the belt. Turn until the pointer aligns with the notch.
5. Install the automatic tensioner bolt.
Tighten
Tighten the timing belt automatic tensioner bolt to 25 Nm (18 ft. lbs.).
6. Rotate the crankshaft two full turns clockwise using the crankshaft gear bolt.
7. Recheck the automatic tensioner pointer.
8. Install the front timing belt cover.
