Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
4. Install the auxiliary catalytic converter lower flange bolts.
Tighten
Tighten the auxiliary catalytic converter-to-connecting pipe nuts to 40 Nm (30 ft. lbs.).
5. Install the connecting pipe mounting bracket and the nuts.
Tighten
Tighten the connecting pipe mounting bracket nuts to 30 Nm (22 ft. lbs.).
6. Install the front wheel well splash shield.
7. Lower the vehicle.
8. Connect the post-converter heated oxygen sensor electrical connector.
9. Connect the negative battery cable.