Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Center Mounted Brake Lamp: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the rear deck lid.
3. Remove the nuts and the center high-mounted stoplamp (CHMSL).
4. Disconnect the electrical connector.
5. Remove the CHMSL bulb.
Installation Procedure
1. Install the replacement CHMSL bulb.
2. Connect the electrical connector.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
3. Install the CHMSL with the nuts.
Tighten
Tighten the center high-mounted stoplamp nuts to 4 Nm (35 lb.in).
4. Connect the negative battery cable.