daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 4666 > < Diagram Information and Instructions|Page 4664
Page 1
background image

Trunk Lamp: Testing and Inspection

Luggage Compartment Lamp Inoperative

CAUTION:  Always make sure there is an electrical load, such as a lamp bulb, in any circuit between battery terminals. Do not make a short circuit
between battery terminals with a jumper wire, or hazardous sparking will result.

The number below refers to Step 1 on the diagnostic table.

1. Bulb test. Clip one end of a jumper wire to the negative battery terminal. Clip the other end of the jumper wire onto one end of the bulb. Take the

end of the bulb without the jumper attached and touch it to the positive battery terminal.

Diagram Information and Instructions|Page 4666 > < Diagram Information and Instructions|Page 4664