daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
Ignition Relay "1" <--> [Main Relay (Computer/Fuel System)] > < Knock Sensor|Diagrams|Page 1713

Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)

Page 2
background image

1. Install the knock sensor with the bolt.

Tighten:  Tighten the knock sensor bolt to 20 Nm (15 lb.ft).

2. Connect the electrical connector at the knock sensor.
3. Lower the vehicle.
4. Connect the negative battery cable.

Ignition Relay "1" <--> [Main Relay (Computer/Fuel System)] > < Knock Sensor|Diagrams|Page 1713