daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
A/C Pressure Transducer <--> [Refrigerant Pressure Sensor / Switch, HVAC] > < Coolant Temperature Sensor / Switch HVAC|Service and Repair

Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)

Page 2
background image

1. Install the coolant temperature sensor into the heater/air distributor case housing and turn the sensor to lock it.
2. Connect the electrical connector.

3. Install the heater/air distributor case assembly lower cover into position.
4. Install the heater/air distributor case assembly lower cover retaining screws and tighten.
5. Install the audio system and the center tray. 
6. Install the glove box.
7. Connect the negative battery cable.

A/C Pressure Transducer <--> [Refrigerant Pressure Sensor / Switch, HVAC] > < Coolant Temperature Sensor / Switch HVAC|Service and Repair