Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
3. Press on the rotor assembly into the end frame.
4. Install the fan on the rotor shaft.
5. Install the collar.
6. Install the slip ring end frame assembly by lining up the terminal ends of the stator with the end frame cover holes and then lining up the
previously made marks on the drive end frame case and the slip ring end frame case before the two cases were separated.
7. Install the generator through-bolts.
Tighten
Tighten the generator through-bolts to 25 Nm. (18 lb.ft).