Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
10. Secure the pressure line with the retaining clip located above the alternator.
11. Connect the return line to the fluid reservoir.
12. Connect the pressure line pipe and the supply line hose to the outlet and inlet connections on the power steering pump.
Tighten
Tighten the pressure line fitting to 27 Nm (20 ft. lbs.).
NOTICE: When adding fluid or making a complete change, always use DEXRON-IID or III power steering fluid. Failure to use the proper fluid
will cause hose and seal damage and fluid leaks.
13. Fill the fluid reservoir with power steering fluid.
14. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system. See: Power Steering Bleeding
