Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
10. Place a rag over the rack, counterhold the rack assembly on the teeth with a wrench, and remove the pinion-side inner tie rod.
IMPORTANT: The retaining ring can be released by inserting a small screwdriver through the hole in the side of the housing.
11. Remove the bulkhead inner cylinder retaining ring the bulkhead inner cylinder and the rack.
Assembly Procedure
NOTICE: Coat all the seals with power steering fluid to ensure proper sealing.
1. Install the rack, the bulkhead inner cylinder, and the bulkhead inner cylinder retaining ring.
NOTICE: To prevent the inner tie rods from loosening, use Loctite 242, or equivalent, on both inner tie rod connections to secure them to the
rack shaft.
IMPORTANT: The right and the left inner tie rods are unequal in length. Be sure to install the correct inner tie rod on the proper side of the
power steering gear.