Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
5. Remove the upper housing retaining ring and, using an arbor press, press on the threaded end of the pinion until it is possible to remove the valve
and pinion assembly from the housing.
6. Remove the stub shaft dust seal, the stub shaft bearing annulus assembly, and the valve and pinion assembly from the housing.
7. Inspect the valve body rings for wear or damage. Replace the valve body rings, as needed. Coat the rings with power steering fluid before
installation.
8. Remove the lower pinion valve seal and bushing. Discard the seal.
Assembly Procedure
NOTICE: Coat all of the seals and bushings with power steering fluid to ensure proper sealing.
