Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Tie Rod End: Service and Repair
OUTER TIE ROD
-
Tools Required
-
KM-507-B Ball Joint Remover
Removal Procedure
1. Remove the wheel.
2. Mark the threads on the inner tie rod to aid in repositioning the adjusting nut.
3. Remove the outer tie rod nut and disconnect the outer tie rod from the steering knuckle using the ball joint remover KM-507-B.
4. Loosen the outer tie rod adjusting nut and remove the outer tie rod by twisting it off the inner tie rod.
Installation Procedure
