Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Remove the knuckle assembly from the vehicle.
2. Remove the rotor.
3. Remove the hub and bearing assembly. See: Wheel Hub
4. Remove the brake splash shield. Refer to Disc Brake System; Brake Rotor/Disc; Disc Backing Plate.
Assembly Procedure
1. Install the brake splash shield. Refer to Disc Brake System; Brake Rotor/Disc; Disc Backing Plate.
2. Install the hub and bearing assembly. See: Wheel Hub
3. Install the rotor.
4. Install the knuckle assembly onto the vehicle.