Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Suspension Strut / Shock Absorber: Service and Repair
Rear Strut
Removal and Installation
Removal Procedure
1. Remove the rear seatback.
2. Remove the rear strut mount-to-body nuts.
3. Raise and suitably support the vehicle.
4. Remove the wheel.
5. Remove the stabilizer link-to-strut assembly nut and disconnect the stabilizer link from the strut assembly.
6. Remove the clip holding the brake hose and disconnect it from the strut assembly.
7. On vehicles equipped with the Anti-lock Brake System (ABS), disconnect the ABS sensor line from the rear of the strut assembly.
8. Remove the brake caliper from the rotor.
