Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
2. Install the knuckle-to-strut assembly nuts and bolts.
Tighten
Tighten the knuckle-to-strut assembly nuts to 120 Nm (89 ft. lbs.).
3. Lower the vehicle. While a second technician holds the strut assembly in place, attach the strut mount-to-body nuts.
Tighten
Tighten the strut mount-to-body nuts to 45 Nm (33 ft. lbs.).
4. Install the rear seatback.
5. Install the brake caliper onto the rotor. Install the brake hose and the clip holding the brake hose to the strut assembly.
6. On vehicles equipped with the Anti-lock Brake System (ABS), connect the ABS sensor line to the rear of the strut assembly.
7. Connect the stabilizer link to the strut assembly and install the stabilizer link-to-strut assembly nut.
Tighten
Tighten the stabilizer link-to-strut assembly nut to 45 Nm (33 ft. lbs.).
