Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Fluid - A/T: Service and Repair
FLUID DRAIN PROCEDURE
Draining Procedure
1. Raise and support the vehicle.
2. Place a suitable fluid drainage container under the transaxle.
3. Remove the fluid drain plug. Allow the fluid to drain completely.
4. Clean the drain plug threads.
5. Install the fluid drain plug.
Tighten
Torque the fluid drain plug to 23 - 55 Nm (17 - 40 ft. lbs.).
Filling Procedure
1. Remove the drainage container and lower the vehicle.
2. Add three-fourths of the recommended amount of Texaco 1854 automatic transmission fluid.
3. Start the engine and allow it to reach normal operating temperature.
4. Shift the gear selector through all positions.
5. Check the fluid level and add fluid in 0.4 liter (0.5 quart) increments until the dipstick indicates a safe level.