Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
8. Install the nut on the shift control cable adjuster pinch bolt. Refer to Shift Cable, A/T; Adjustments.
Tighten
Tighten the shift control cable adjuster pinch bolt nut to 8 Nm (71 inch lbs.).
Notice: Make sure the slot in the Transmission Range (TR) switch is all the way forward and the shift control lever is in the P position. Failure to do
so may damage the TR switch and produce a false gear indication.
9. Install the TR switch on the shift control assembly.
10. Install the floor console, the shift control panel, and the right and the left front lower trim panels.
11. Connect the negative battery cable.
