Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
2. Support and position the valve body onto the transaxle case. While supporting the valve body, carefully connect the manual valve connecting rod
to the lever and install one of the valve body bolts hand tight. Install the remaining six valve body retaining bolts hand tight.
3. Install the suction cover and suction cover retaining bolts hand tight.
Tighten
Tighten the valve body and suction cover retaining bolts to 6 - 7 Nm (53 - 62 inch lbs.).
4. Connect the four valve body solenoid electrical connectors.
Notice: Remove the old gasket material from the valve body cover and mating surface of transaxle.