Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Transmission Mount: Service and Repair
Transaxle Mount
Disassembly Procedure
1. Remove the center member from the vehicle.
2. Remove the transaxle bracket mount-to-center member bolts.
3. Remove the transaxle bracket mount.
Assembly Procedure
1. Install the transaxle bracket mount.
2. Install the transaxle bracket mount-to-center member bolts.
Tighten
Tighten the transaxle bracket mount-to-center member bolts to 65 Nm (48 ft. lbs.).
3. Install the center member into the vehicle.