Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Windshield Washer Reservoir: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the front left wheel.
3. Remove the front wheel well splash shield.
4. Disconnect the washer hose from the washer pump.
5. Disconnect the reservoir pump electrical connector.
6. Remove the bolts and the reservoir.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.