Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Installation Procedure
1. Place the exhaust tail pipe trim ring on the rear muffler pipe.
2. Secure the exhaust pipe trim ring on the rear muffler pipe with the bolt.
-
Tighten the rear muffler pipe-to-exhaust trim ring bolt to 15 Nm (11 ft. lbs.).
3. Install the rear muffler assembly on the rubber hangers.
4. Install the gasket between the rear muffler pipe flange and the front muffler pipe flange.
5. Install the front muffler pipe to the rear muffler pipe with the nuts.
-
Tighten the front muffler pipe-to-rear muffler pipe nuts to 30 Nm (22 ft. lbs.).