Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Install the SDM with the arrow pointing toward the front of the vehicle.
2. Install the SDM mounting bolts.
Tighten
Tighten the sensing and diagnostic module mounting bolts to 10 N.m (89 lb-in).
3. Connect the SDM electrical connector.
4. Install the connector position assurance lock.
5. Install the floor console. Refer to Interior Trim.
6. Reinstall the airbag fuse F15 which was removed when disabling the SIR system.
