Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Suspension Control Module: Service and Repair
ICSM ASSEMBLY
Removal Procedure
1. Remove the ICSM mounting bolts.
2. Disconnect the 30 pin ICS wiring harness connector from its socket on the ICSM.
Installation Procedure
1. Connect the 30 pin ICS wiring harness.
2. Tighten the ICSM mounting bolts.
Tighten the ICSM mounting bolts to 4 Nm (35 inch lbs.).
