Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Rear Door Hinge: Service and Repair
(Rear Door Shown, Front Door Similar)
Removal Procedure
1. With the aid of another technician, remove the bolts and the hinge from the door and the body.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. With the aid of another technician, install the hinge to the door and the body with the bolts.
Tighten
Tighten the door hinge-to-body bolts to 39 Nm (29 lb.ft).
Tighten the door hinge-to-door bolts to 20 Nm (15 lb.ft).
