Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
Seat Cushion: Service and Repair
Rear Seat Side Bolster Cushion
Removal Procedure
1. Remove the rear seat cushion.
2. Remove the bolt that secures the rear seat side bolster cushion.
3. Lift and remove the rear seat side bolster cushion.
Installation Procedure
1. Slide the rear seat side bolster cushion into the retaining brackets.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the rear seat side bolster cushion with the bolt.
Tighten
Tighten the rear seat side bolster cushion bolt to 25 Nm (18 lb.ft).
3. Install the rear seat cushion.