Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
passenger compartment or the trunk.
INSTALLATION PROCEDURE
1. Place the exhaust tail pipe trim ring on the rear muffler pipe.
2. Secure the exhaust pipe trim ring on the rear muffler pipe with the bolt.
Tighten
Tighten the rear muffler pipe-to-exhaust trim ring bolt to 15 Nm (11 ft. lbs.).
3. Install the rear muffler assembly on the rubber hangers.
4. Install the gasket between the rear muffler pipe flange and the front muffler pipe flange.
5. Install the front muffler pipe to the rear muffler pipe with the nuts.