Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
1. Connect the replacement bulb to the cigar lighter lamp housing electrical connector.
2. Install the replacement bulb into the cigar lighter lamp housing.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
3. Install the ashtray housing with the screws.
Tighten
Tighten the ashtray housing screws to 2.5 Nm (22 lb.in).
4. Install the shift lever trim plate.
5. Connect the negative battery cable.
