Leganza SX L4-2.2L DOHC D-TEC MFI (1999)
1. Install the chime module with the screws.
Tighten
Tighten the chime module screws to 4 Nm (35 lb.in).
2. Connect the electrical connector.
3. Install the instrument panel side trim cover with the screw.
Tighten
Tighten the instrument panel side trim cover screw to 2.5 Nm (22 lb.in).
4. Install the knee bolster trim panel with the hood release handle screw.
Tighten
Tighten the hood release handle screw to 2.5 Nm (22 lb.in).
5. Connect the negative battery cable.
