Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
Brake Hose/Line: Service and Repair
Rear
Removal Procedure
1. Raise and suitably support the vehicle.
2. Disconnect the brake line from the disc brake hose at the wheel housing bracket on each side of the vehicle.
3. Remove the brake hose retainer.
4. Remove the rear disc brake hose retainer and the brake hose from the bracket on the steering knuckle shaft.
5. Remove the rear disc brake hose from the caliper.
Installation Procedure
1. Install the rear disc brake hose to the caliper.
Tighten
Tighten the rear disc brake hose-to-caliper bolt to 32 Nm (24 ft. lbs.).
2. Install the rear disc brake hose and the retainer on the bracket on the steering knuckle shaft
