Nubira CDX Sedan L4-2.0L DOHC D-TEC MFI (1999)
5. Connect the electrical connectors.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
6. Install the headlamp assembly with the bolts and the nut.
Tighten
Tighten the headlamp assembly bolts to 4 Nm (35 lb.in).
Tighten the headlamp assembly nut to 4 Nm (35 lb.in).
7. Connect the negative battery cable.
