Replacing Driver Airbag Module in Nubira CDX Sedan: Step-by-Step Guide
CAUTION: When removing an airbag module or handling a new airbag module, always keep the top of the unit facing upward. This leaves room for
the air - bag to expand if the module unexpectedly deploys. Without room for expansion, a module suddenly propelled toward a person or object can
cause injury or vehicle damage.
1. Install the connectors to the horn terminal and the driver airbag module.
2. Install the driver airbag module.
3. Install the driver airbag module mounting bolts.
Tighten
Tighten the driver airbag module mounting bolts to 8 Nm (71 lb.in).
4. If the yellow clock spring connector was previously disconnected, connect the clock spring connector on the lower steering column and replace the
knee bolster.
5. Connect the negative battery cable.
