Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
4. Disconnect the rear wheel speed sensor electrical connectors at both wheels.
5. Unplug the rear jumper harness from connector C902.
Installation Procedure
1. Plug the harness connector into C902.
2. Secure the harness with two ties clipped in the hole provided. The longer branch goes to the right side speed sensor.
3. Connect the new wheel speed sensor harness to both wheel speed sensors.
4. Replace the harness cover over the forward suspension arms.
5. Secure both sides of the harness with new cable tires.
6. Lower the vehicle.
7. Connect the negative battery cable.
