daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Relays and Modules - Powertrain Management > < Audible Warning Device Control Module|Description and Operation
Page 1
background image

Audible Warning Device Control Module: Service and Repair

(Left-Hand Drive Shown, Right-Hand Drive Similar)

Removal

1. Disconnect the negative battery cable.
2. Remove the knee bolster trim panel beneath the steering column.
3. Disconnect the electrical connector.
4. Remove the screws and the chime module.

Installation

1. Install the chime module with the screws.

Tighten
Tighten the chime module screws to 4 N.m (35 lb-in).

2. Connect the electrical connector.
3. Install the knee bolster trim panel beneath The steering column.
4. Connect the negative battery cable.

Relays and Modules - Powertrain Management > < Audible Warning Device Control Module|Description and Operation